Self-closing pivot hinges

System M

System M, our self-closing pivot hinge, offers you absolute control over the movement of your pivot door. With just the touch of a finger, the pivot door is set into a single fluid motion. Opening the door is effortless and controlled, the movement elegant and the closing as soft as a whisper.

  • Self-closing pivot hinge
  • Damper Control (soft close and wall protection)
  • Hold positions at 0˚, 90˚and -90˚
  • For double- and single-acting doors

learn more

Technology, quality, aesthetics

FritsJurgens’ self-closing pivot hinge System M creates endless possibilities regarding the design of your pivot door. There are virtually no limits to its size and weight, thanks to the high load bearing capacity of the system. The fluent movement of every pivot door with a FritsJurgens pivot hinge inside is guaranteed up to 350 kg. The height of the door is unlimited. Take your pivot door design to the next level with FritsJurgens System M.

Smooth movement with System M

The damper control in FritsJurgens’ self-closing pivot hinge System M has two functions. It protects your door from touching the wall and ensures a smooth and elegant closing movement.

The hydraulic backcheck (1) protects the pivot door against touching the wall by slowing the pivot door down strongly when reaching 70°. The closing damping (2) makes the door close elegantly. The damper control is adjustable, allowing you to determine the amount of damping.

1. Hydraulic backcheck (wall protection)

2. Closing speed (soft close)

8mm in the floor

The floorplate fasteners only need to be mortised 8mm in the floor, which means System M can be applied in combination with floor heating.

Minimum door thickness of 40 mm

System M is suitable for almost every door width and barely any space is needed around the door.

Smart installation

A pivot door with System M inside is easy to install. First, the floor- and ceiling plate are mounted. Then the pivot door can easily be placed. Finally, you can finetune the door to create the movement you desire.

Model selector

System M can support light and heavy pivot doors thanks to high performance and corrosion resistant materials. Find out which model suits your pivot door.

SYSTEM M 

hidden in the door

Like every pivot hinge system by FritsJurgens, our self-closing pivot hinge System M is unique because there are no structural elements necessary in the floor and the ceiling. The pivot door hinges are fully mortised in the top and bottom of the door.

Only surface-mounted floor and ceiling plates need to be installed. It is a virtually invisible system. All the attention goes where it is supposed to go – to the design of the pivot door and its surroundings.

Move past the daily function of a door and create a design statement with FritsJurgens System M.
components

Ceiling plate

The ceiling plate is fitted in the ceiling. The pin of the top pivot fits seamlessly into the hole in the ceiling plate. The ceiling plate is available in brushed stainless steel and black and can be obtained in the rectangular version.

Top pivot

The top pivot is integrated into the top of the door and uses a so-called pinhole connection. The pin is fixed to the top pivot and drops into the hole in the ceiling plate when this is turned.

System M

FritsJurgens’ self-closing pivot hinge System M is integrated into the lower part of the door. The oval base of the hinge is inserted into the slot in the floor plate.

Floor plate

The floor plate is available in two finishes and shapes. It can be obtained in a round and a rectangular version in brushed stainless steel and black. The floorplates by FritsJurgens are made of solid tempered steel (series 420) and therefore fully scratch resistant.

SPECIFICATIONS

Model selector

To ensure the pivot hinge provides the appropriate movement for your door, System M is available in six models suited to the weight and width of the door.

Load-bearing capacity

System M is suitable for both light and heavy pivot doors covering a range between 20 and 350 kg.

Minimum door thickness

40 mm

Minimum-installation dimensions around the door:

Below:
11 mm
Above:
Minimum 4 mm, maximum 10 mm

Door/closing side:

Gap calculation

Hold positions

0˚, 90˚ and -90˚

Minimum distance from the pivot point to the side of the door

91 mm.

Maximum door dimensions

Unrestricted up to a maximum weight of 500 kg (System M model selector)

For any type of pivot door

FritsJurgens System M is suitable for any type of pivot doors (interior and exterior pivot doors). For more information please contact us.

Floating floors / suspended ceilings

It is possible to fit a pivot door if the floor plate or ceiling plate is connected to the structural subfloor or ceiling.

Packaging

Delivered as a complete set with top pivot, floor plate, ceiling plate and milling accessories.

Guarantee

Two-year manufacturer’s guarantee.

Technical files

Where to buy

FritsJurgens has qualified partners in numerous countries. Would you like to purchase pivot-door hinges or are you looking for a pivot-door manufacturer? Please contact us for more information.

SEND A REQUEST

"Thank you for your request"

back to previous