Search results

Ask us anything System M+, System M, System One

51 results for ‘System M’

  • 3D drawing System One (previous model) - STEP

    For: 3D drawing System One (previous model) - STEP

    Download

  • 3D drawing System One 40 mm (new model) - STEP

    For: 3D drawing System One 40 mm (new model) - STEP

    Download

  • 3D drawing System One 70 mm (new model) - STEP

    For: 3D drawing System One 70 mm (new model) - STEP

    Download
  • faq

    Can you adjust the damping of System 3 hinges?

    The System 3 is a hinge without damping or damped closure. The hinge is self-opening and closing from 45 degrees. The door then continues its motion to seek the locking position at 90 degrees. This function makes the System 3 the most suitable for 360 degrees (pivoting in the middle) doors.

  • faq

    What is the minimum and maximum weight per system?

    You can select the correct hinge on the basis of the width and weight of the door at: /selector

  • faq

    Can a System 3 hinge be installed on the side?

    FritsJurgens recommends only using a System 3 hinge for doors that pivot 360 degrees from the middle. As the System 3 lacks an opening damper there is a risk that the door will hit the wall when it is opened.

  • Dream bigger. With smaller hinges.

    To make something better does not necessarily mean ‘go bigger’. Discover System One.

    https://www.fritsjurgens.com/inspiration/blog/dream-bigger-with-smaller-hinges
  • faq

    How is your system installed in combination with cast floors?

    In the case of a cast floor, it is best to use the longer pins (30 mm) that we supply. You can shorten the length easily if desired. The fact that subfloors (e.g., sand cement) are often slightly porous means that you want the pins to be firmly secured in the subfloor.

  • faq

    How do you install your system in combination with parquet?

    We recommend using the 30 mm long pins with parquet. As parquet is laid loosely (unfastened) and can therefore move slightly we advise against using only the 8 mm pins.

  • faq

    How do I select the correct pivot hinge for my project?

    The placement of the pivot point and the desired functionalities determine which pivot system suits your project best. In a few easy steps your pivot kit is assembled and quoted via our selector tool.